Menu
Menu
Your Basket
My Basket
Total:£0.00
0
Compare Square Filter Systems
from SRB Photographic
Elite Holder
Elite lite Holder
Elite nano Holder
Material
Aluminium
Plastic (blades)
Aluminium
Plastic (blades)
Aluminium
Plastic (blades)
Need Adaptor Rings
Yes
Yes
Yes
Filter Slots
2
2
2
Clip Mechanism
Yes
Yes
Yes
Rotating Mechanism
Yes
-
-
Take Elite Filters
Yes
-
-
Wide-angle Kit
-
Yes
-
A Size
-
-
Yes
P Size
Yes
Yes
-
Weight
85g
65g
62g
Elite Holder
+

The P Size Elite Filter Holder is a brilliantly engineered square filter holder from SRB Photographic designed to accommodate P Size square filters and the Elite filter range.

Attach the Elite Filter Holder to your camera lens with the correct sized Elite Adaptor Ring (sold separately). Once the adaptor ring has been screwed to the lens, simply use the clip mechanism at the top of the holder to slot it onto the adaptor ring. The clip mechanism has been designed to allow for easy attaching and removing of the holder from the camera lens.

With the Elite Holder attached it is now fully functional and allows for the holder to fully rotate when in use. Now you can start using the P Size Elite Filter System!

This holder can take up to two P Size standard filters at any one time, simply insert them by sliding your P Size filter (85mm) into any of the two filter slots on the side of the holder. 

As well as P Size square filters, the Elite Holder can accommodate our new Elite filters. These Elite Filters have been specifically designed for the holder and feature a threaded circular rugged mount around the outside. They then screw into the centre thread of the holder, thus eliminating any light seeping. This is a particular brilliant design for when using the Elite ND1000 filter, meaning there is no longer any need to use a gasket.

Another great new feature for when using the Elite Filters, is the rotating mechanism at either end of the holder. This has been designed mainly for the Elite Polariser Filter. Once the Elite Polariser has been screwed into the holder, use the rotating mechanism to rotate the polariser clockwise or counter-clockwise to get a different amount of polarisation. 

The Elite Filter Holder has been beautifully crafted from three separate pieces of high grade aluminium material that have been carefully connected together and finished off with a black anodised coating.
 

˟ close
Elite lite Holder
+

The Elite lite Filter Holder is a lightweight aluminium square filter holder made by SRB Photographic that is designed to accommodate 85mm square filters.

A great feature to the Elite lite Holder is the Wide-angle Kit (included), making it possible to modify your Elite lite Holder to work at a minimum focal length of 16mm. This is done by removing one filter blade from each side of the holder.

Use the Elite lite Filter Holder by attaching it to your camera lens with the correct sized Elite Adaptor Ring (sold separately). Once the adaptor ring is attached to the lens, use the clip mechanism to slot in the Elite lite holder.

The clip mechanism has been designed to allow for easy attaching and removing of the holder from the camera lens.

The Elite lite holder can take up to two 85mm (p size) square filters at any one time. To use the filters, simply slide them into any one of the two filter slots at the side of the holder. note that only one square filter can be used when using the Wide-angle Kit.

The Elite lite holder also includes the Elite Grad Lines, which are visible on the front blades of the holder. These lines help achieve the perfect horizon when using graduated filters, allowing you to line up your grad filter with the exact center of the holder and to keep a straight balanced line in your scene.

Beautifully crafted from a single piece of high grade aluminium material, the Elite lite Filter Holder has then been given an eye-catching matte black anodised coating.

Lens compatibility: The Elite lite Holder is designed to fit standard lenses, although may still be compatible with some wide-angle lenses depending on lens diameter. The holder will work down to a focal length of 20mm until vignetting appears, although working focal lengths may vary depending on the optical design of the lens. When using the wide-angle kit and just 1 filter slot the holder will work down to a focal length of 16mm until vignetting appears, although working focal lengths may vary depending on the optical design of the lens.


˟ close
Elite nano Holder
+

The Elite Nano Filter Holder is a lightweight aluminium square filter holder made by SRB Photographic that is designed to accommodate 67mm (a size) square filters.

Use the Elite Nano Holder by attaching it to your camera lens with the correct sized Elite Nano Adaptor Ring (sold separately). Once the adaptor ring is attached to the lens, use the clip mechanism to slot in the holder.

The clip mechanism has been designed to allow for easy attaching and removing of the holder from the camera lens.

The Elite Nano holder can take up to two 67mm (a size) square filters at any one time. To use the filters, simply slide them into any one of the two filter slots at the side of the holder. Beautifully crafted from a single piece of high grade aluminium material, the Elite Nano Filter Holder has then been given an eye-catching matte black anodised coating.

The Elite Nano Holder is designed to fit standard lenses, although may still be compatible with some wide-angle lenses depending on lens diameter. The holder will work down to a minimum focal length of 14mm until vignetting appears, although working focal lengths may vary depending on the optical design of the lens.
 

˟ close